| This superb lightweight sports ground mower is not only perfect for soccer pitches where compaction is a problem, but also for large areas of formal lawns, where the collection of grass and a beautiful striped effect are required. An optional trailing seat can be used to increase efficiency on larger areas. Call us now and ask for a demonstration. |
The Buffalo 34 is a very compact, well balanced machine and is highly manoeuvrable in confined areas. The mower has a low profile for good forward visibility. Despite its light weight, the Buffalo 34 is very robust and both long life and easy servicing are assured.
The rear roller is in three sections and is rubber covered for good traction and silent running over hard surfaces. Internally, the rear roller is fitted with hardened steel differential gears, which run in a sealed oil bath. The optional trailing seat also has a rubber covered roller.
In common with all other Allett mowers, height and cutter adjustments are very easy on the Buffalo 34. Designed to run on low engine revs., the machine is very smooth, quiet and economical to operate.
The large diameter cutting cylinder gives the machine the ability to cut long grass, even in wet conditions, which leave other mowers in the shed! |
|
Cutting Width |
863.6mm (34”) |
| Overall Width |
1041mm (41”) |
| Weight |
175kg (385lb) |
| Engine |
Honda GX160 5.5hp ohv petrol. |
| Overall Height |
1010mm (40”) |
| Overall Length |
1280mm (50”) |
| Rate of Cut |
66 cuts per metre (60 cuts per yard / 1.66 cuts per inch) |
| Height of Cut |
10mm to 40mm (3/8” to 1.5”) |
| Drive Clutch |
Handle mounted lever operating tight and loose V belt via a cable. |
| Cutter Clutch |
Handle mounted lever operating tight and loose triple V belts via a cable. |
| Rear Roller |
Three piece steel sections, rubber covered. |
| Differential |
Hardened steel gears running in a sealed oil bath. |
| Front Roller |
Aluminium running on sealed bearings. |
| Cylinder |
6 bladed, all welded, high carbon spring steel, Mounted on greaseable bearings. |
| Bottom Blade |
Manufactured from EN8 hardened and tempered to 45HRC. |
| Handle Bar |
Adjustable with anti-vibration mountings. |
| Grassbox |
Rotationally moulded plastic with steel reinforcing strip. |
| Optional Extras |
Trailing seat. |
| |
|
 Back to top |
We reserve the right to alter specifications without notice. |
