A truly professional machine for the contract grass cutting market.
The Allett Buffalo is so outstanding that it was voted "Best Pedestrian Cylinder Mower" and "Best Overall Product" by Amenity Management Magazine. |
| The Buffalo is an extremely rugged mower with a large diameter cutting cylinder giving it the ability to cut long grass even in wet conditions that leave other cylinder mowers in the shed!
Designed to operate on low engine revs. This is to reduce fuel consumption, noise and vibration levels and wear and tear on the mower, the operator and the environment.
The Buffalo is available in two very different specifications. Firstly as a conventional cylinder mower, with a full width front roller, rubber covered rear roller and a grassbox. In this specification it produces an excellent striped finish for lawns, golf tees etc. Secondly as a wheeled machine. Short stub rollers at the front allow longer grass to pass through the cutters and out the back between the rear wheels. In this specification grass up to 200mm (8") in height can be cut. |
|
|
20” Buffalo |
24” Buffalo |
27” Buffalo |
| Cutting Width |
510mm (20”) |
610mm (24”) |
686mm (27”) |
| Overall Width |
686mm (27”) |
787mm (31’) |
864mm (34”) |
| Weight |
111kg (2445lb) |
122kg (269lb) |
138kg (304lb) |
| Engine |
Honda GX120 4hp |
Honda GX160 5.5hp |
Honda GX160 5.5hp |
| Overall Height |
1010mm (40”) |
| Overall Length |
1280mm (50”) |
| Rate of Cut |
82 cuts per metre (75 cuts per yard / 2.1 cuts per inch) |
| Height of Cut |
10mm to 40mm (3/8” to 1.5”) |
| Drive Clutch |
Handle mounted lever operating tight and loose V belt via a cable. |
| Cutter Clutch |
Handle mounted lever operating tight and loose twin V belts via a cable (triple belts on 27” machines). |
| Rear Roller |
Two piece steel, rubber covered with bevel gear differential. |
| Front Roller |
All steel on sealed bearings. |
| Cylinder |
6 bladed, all welded, high carbon spring steel, hardened and tempered to 45HRC Mounted on greaseable bearings. |
| Bottom Blade |
Manufactured from EN8 hardened and tempered to 45HRC. |
| Handle Bar |
Adjustable with anti-vibration mountings. |
| Grassbox |
Rotationally moulded plastic with steel reinforcing strip. |
| Optional Extras |
Pneumatic rear wheels and front stub rollers. |
| |
|
 Back to top |
We reserve the right to alter specifications without notice. |
